Shandong Zhongrui Plastic Machinery Co., Ltd. Production of PET packing belt equipment characteristics
1. PET packing belt equipment extruder USES PET special screw, parameter design, screw has separation and mixing effect, to ensure the uniform plasticization of materials. With large extrusion capacity, good plasticizing, high hardness, high wear resistance and other advantages.
2. Three-dimensional folding type area filter device, the spread area of the filter screen is 30 times the area of the traditional plane filter screen, the number of filter mesh can reach 80 mesh, can all use bottle sheet material production, out of the finished product quality can be compared with the new material.
3. The runner honeycomb dehumidification drying system produced by the company is used to dry raw materials, which ensures that the moisture content of raw materials is less than or equal to 50PPM, and has the effect of solid condensation polymerization and viscosity increase.
4. Rewinding machine adopts double station rewinding device, easy to operate and easy to change.
5. Oven circulation heating system, internal reciprocating winding mode, make full use of heat energy to greatly reduce power loss.
6. Five-roller traction system, stable traction force, stable operation of equipment, reduce failure rate, reduce maintenance costs by 60%.
> Infrared crystal dryer -----Dry &Crystallize R-PET flakes/chips in 20mins at 30ppm by saving 45-50% energy cost.
| 1 |
Reduce manufacture cost of PET strap: Up to 60% less energy consumption than conventional drying system |
| 2 |
Instant start-up and quicker shut down --- No need pre-heating |
| 3 |
Drying& crystallization will be processed in one step |
| 4 |
To improve the tensile strength of PET Strap,Increase the added value --- Final moisture can be ≤30ppm or 100ppm by 20mins Dry &Crystallization |
| 5 |
The machine line is equipped with Siemens PLC system with one key memory function |
| 6 |
Covers an area of small, simple structure and easy to operate and maintenance |
| 7 |
Independent temperature and drying time set |
| 8 |
No segregation of products with different bulk densities |
| 9 |
Easy clean and change material |
FAQ
Q: What about the output of PET strapping band extrusion line?
A: 200kg/hr, 400kg/hr, 600kg/hr, 800kg/hr.
Q: What about the size of strap that the PET strap machine can make?
A:Width: 9-32mm; Thickness: 0.35-1.2mm;
Q: What about the maximum tensile strength of the strap?
A: 12000N (32*1.2mm);
Q: What about the camber of strap?
A: <20mm/2m;
Q: What about the usage of PET strap?
A: Packing cotton, aluminum, wood, brick, boxes;
Q:Will the strap be used for automatic strapping tool or manual tool?
A: Both.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}