Flame Retardant Wire and Tube Production Machine

• Customization: Available
• Product Type: PVC Pipe
• Screw No.: Double-screw
• Model NO.: SJSZ-51/105
• Computerized: Non-Computerized
• Certification: QS
• Customized: Customized
• Condition: New
• Overall Dimensions: 15*1.5*2.6m
• Type: Tube Extruder
• Motor Power: 22kw
• Extrusion Capacity: 60-100(Kg/H)
• Pipe Diameter Range: 16-50mm
• The Screw Diameter: 51mm
• Maximum Extrusion Diameter: 51mm
• Production Line Speed: 5-12(M/Min)
• Positioning Accuracy: 0.1mm
• Heating Power of Barrel: 18kw
• Transport Package: Container
• Specification: 16/50
• Trademark: Zhongrui
• Origin: Qingdao, China
• Production Capacity: 100 Sets
• Package Size: 1500.00cm * 150.00cm * 260.00cm
• Package Gross Weight: 6000.000kg

Product Description

Performance and advantages of PVC pipe production equipment: PVC pipe (drainage, water supply, electricity) equipment is specially designed for PVC material characteristics, using conical twin-screw extruder, and the entire production line from extruder to auxiliary equipment is automatically controlled, and the output is high. , Long-term stable production.
Advantages of pipe equipment technical parameters:
1. Production range: the range of the diameter of the production pipe is 16-63mm
2. Total installed power: around 80kw
3. Production capacity: The output of the one-out two-pipe production line is increased by 70% while maintaining the product quality of the one-out two-pipe production line
4. Power loss: There is no power consumption in the cutting machine part of the two pipe lines
5. Total noise: After the production line starts normally, there is basically no noise
6. Dust pollution: Because the cutting part of the two-pipe production line is cut by saw blades and the cylinder is automatically driven, there is no cutting debris in the whole production line, and there is basically no dust pollution.
 

Product Description

Precautions for use of threading pipe
 

1.	can not without reason winding, this will not only cause dead wire, but also increase the input of electricity reform.
2.	Do not wear too much thread in a threading tube. After threading, you should drag it to see if it can be easily pulled.
3.	If the line has joints, it is necessary to leave the black box buckle panel at the joints, which is convenient for replacement and maintenance in the future.