Specification of PP strapping band equipment:
| Main application material |
PP |
| Line speed (m/min) |
120-180m/min |
| Width(mm) |
9-19(mm) |
| Thickness(mm) |
0.6-1.2mm |
Introduction to packing tape equipment
1. The main and secondary drive of PP packing belt production line is composed of speed regulating motor, reducer and shaft sleeve. The forming part is composed of screw barrel, head and die. The raw material is heated and extruded through the hopper to the screw barrel.
2. The water tank under the production line of PP packing belt cools and finalize the initial embryo of the main and auxiliary machine port die. After the material out of the head temperature is very high, to immediately enter the water cooling.
3. The first traction of PP packing belt production line is composed of speed regulating motor, traction roller, reducer and chain drive. It is the initial embryo after the mold is transferred to the oven.
4, PP packaging belt production line oven secondary heating is easy to stretch, the main purpose of stretching is to improve the longitudinal strength of packaging belt, reduce elongation
5, PP packaging belt production line embossing machine transmission is speed regulating motor through belt drive, chain drive, gear drive to the second traction, to embossing, and then traction.
6, PP packaging belt production wire reel belt machine drive is speed regulating motor through the belt drive, chain drive respectively to the reel shaft and travel rod.
1. The equipment produced by our company will be successfully tested before delivery. Test machine can come to our company to watch the production site, on-site testing.
2, the purchase of our company's equipment, during the quality guarantee period, if the quality problems caused by failure, responsible for the equipment warranty service, customers can rest assured to buy.
Audited Supplier 
){kind=link}
){kind=link}