PVC equipment function
(1) Mixing of raw materials for PVC pipe production line: PVC stabilizers, plasticizers, antioxidants and other auxiliary materials are added to the high-speed mixer according to the proportions and processes, and the materials are heated to the set process through self-friction between the materials and the machine. The temperature is then reduced to 40-50ºC by the cold mixer; in this way, it can be added to the hopper of the extruder.
(2) Extruder part of PVC pipe production line: This machine is equipped with a quantitative feeding device, so that the extrusion volume can be matched with the feeding volume, and the product can be extruded stably. Due to the characteristics of the conical screw, the feeding section has a larger diameter, and the heat transfer area and shear speed of the material are relatively large, which is conducive to the plasticization of the material. The small screw diameter in the metering section reduces the heat transfer area and the melt. The shear speed enables the melt to be extruded at a lower temperature. When the screw rotates in the barrel, it plasticizes the PVC mixture and pushes it to the machine head, so as to achieve compaction, melting, mixing and homogenization; and to achieve the purpose of exhaust and dehydration. The feeding device and the screw drive device adopt frequency conversion speed regulation, which can realize synchronous speed regulation
(3) The extrusion die head part of the PVC pipe production line: the PVC that is compacted, melted, mixed and homogenized, and the subsequent materials are pushed to the die head by the screw. The extrusion die head is a key part of the pipe forming.
(4) The vacuum shaping water tank of the PVC pipe production line is a mold with double cavities, which is used for shaping and cooling the pipes. The vacuum shaping water tank is equipped with a vacuum system and a water circulation system for shaping and cooling. The stainless steel box body, circulating water spray cooling, The vacuum shaping water tank is equipped with front and rear moving devices and manual devices for adjusting left and right and height.
(5) The tractor of the PVC pipe production line is used to continuously and automatically lead the cooled and hardened pipe from the machine head, with frequency conversion and speed regulation.
(6) PVC pipe production line cutting machine: After being controlled by the stroke switch according to the required length, it will automatically cut, and delay the turning frame, and implement the flow production. The process is synchronized with the operation of the pipe. The cutting process is completed by electric and pneumatic drive. The cutting machine is equipped with a dust suction device to suck out the cutting debris in time and recover it.
(7) The turning action of the material turning frame of the PVC pipe production line is realized by the pneumatic control of the air cylinder. The turning frame is equipped with a limit device. When the cutting saw cuts the pipe, the pipe continues to be transported. After a delay, the cylinder enters work. , Realize the turning action and achieve the purpose of unloading. After unloading, it will automatically reset after a few seconds delay, and wait for the next cycle.
Audited Supplier 
){kind=link}